United States
Contact
Contact Finder Location Finder Feedback for the President Contact us
myHYDAC

OLF kidney Loop Filter system. 10 GPM flowrate operating at 115VAC single phase. 2 micron elements with Buna seals

Request a Quote
Unit of Measure
Items
OLF Series Offline Filtration System

HYDAC OLF-15 Series Offline Filtration System
OLF Series Offline Filtration System

HYDAC OLF-30 Series Offline Filtration System
OLF Series Offline Filtration System

HYDAC OLF-45 Series Offline Filtration System
OLF Series Offline Filtration System

HYDAC OLF-60 Series Offline Filtration System
Features and Benefits N/A The OLF series of filters is designed to efficiently and cost effectively filter hydraulic oils, lubricating oils, cleaning fluids and coolants which are highly contaminated. The filters can be supplied either as individual filters or as ready-to-install offline units complete with optional motor and pump units.
Lower Operating Costs
Extended Element Service Life
Cleaner, more efficient systems.
Dimicron® Technology N/A Dimicron® technology, which incorporates membrane filtration and multi-disc construction, sets the OLF apart from conventional filters by providing it with exceptional dirt holding capacity and separation efficiency. Each filter element is able to capture and hold more than 1 pound of dirt, meaning that the OLF60, which uses four elements, will hold nearly 5 pounds of dirt. Membrane filtration provides the OLF with a separation efficiency over 99.9% for particles 2 micron and larger (ß2 > 1000) even in a single pass.
Applications N/A Typical applications include:
Filling and flushing hydraulic units
Filtration of fluids for hydraulic systems and test stands
Filtration of cleaning fluids for parts washing machines
Filtration of coolants
Dimicron® Element N/A The synthetic membrane (2 µm absolute) provides a high filtration rating while the cellulose filter layer collects and holds the bulk of the dirt load. This combination results in excellent removal efficiency, even in a single pass, and extremely high dirt holding capacity.
Housing Inlet and Outlet N/A 1 5/16 - 12UN (SAE 16) G1*
Pump Inlet (Vane) N/A 1 1/16 -12UN (SAE 12) G3/4 N/A 1 5/8 -12UN (SAE 20) G1 1/4 N/A 1 5/8 -12UN (SAE 20) G1 1/4 N/A 1 5/8 -12UN (SAE 20) G1 1/4
Pump Inlet (Gear) N/A 1 1/16 -12UN (SAE 12) G3/4 N/A 1 5/16 -12UN (SAE 16) G1 N/A 1 7/8 -12UN (SAE 24) G1 1/2 N/A 1 7/8 -12UN (SAE 24) G1 1/2
Pump Inlet (Centrifugal) N/A 1 5/16-12UN (SAE 16) G1 N/A 1 5/16-12UN (SAE 16) G1 N/A 1 5/8 -12UN (SAE 20) G1 1/4 N/A 1 5/8 -12UN (SAE 20) G1 1/4
Contamination Retention Capacity N/A 500 g1.1 lb N/A 1000 g2.2 lb N/A 1500 g3.3 lb N/A 2000 g4.4 lb
Filter Element N/A N15DMxxx(1x) N/A N15DMxxx(2x) N/A N15DMxxx(3x) N/A N15DMxxx(4x)
Filter Efficiency (ßx) N/A > 1000
Permissible Δp Across the Element N/A 72.5 psi
Weight Element N/A 6.6 lb N/A 13.2 lb N/A 19.8 lb N/A 26.4 lb
Material of Filter Housing N/A Stainless Steel
Capacity of Pressure Vessel N/A 5.25 gal N/A 10.5 gal N/A 15.75 gal N/A 20.5 gal
Maximum Operating Pressure Filter Housing N/A 85 psi
Material of Seals-Housing (Standard) N/A Nitrile Butadiene Rubber (NBR)
Weight Housing N/A 25 lb N/A 33 lb N/A 53 lb N/A 62 lb
Fluid Temperature Range N/A 15 to 175 ºF
Motor-Pump Flow Rating N/A 5 gpm N/A 10 gpm N/A 15 gpm N/A 20 gpm
Operating Pressure of the Pump N/A 65 psi
Viscosity Range with Vane Pump N/A 75 to 2500 SUS
Viscosity Range with Gear Pump N/A 75 to 5000 SUS
Viscosity Range with Centrifugal Pump N/A 5 to 100 SUS
Vane Pump Motor Capacity N/A 370 W N/A 570 W N/A 1500 W N/A 1500 W
Gear Pump Motor Capacity N/A 370 W N/A 570 W N/A 1500 W N/A 1500 W
Centrifugal Pump Motor Capacity N/A 370 W N/A 570 W N/A 1500 W N/A 1500 W
Vane Pump Weight N/A 17 lb N/A 30 lb N/A 43 lb N/A 43 lb
Vane Gear Weight N/A 21 lb N/A 33 lb N/A 49 lb N/A 49 lb
Centrifugal Pump Weight N/A 33 lb N/A 33 lb N/A 55 lb N/A 55 lb
Material of Seals in Pumps (Standard) N/A Nitrile Butadiene Rubber (NBR)
Model Code - Series N/A OLF = Stationary offline filter with integrated pressure gauge
Model Code - Size N/A 15 = 1 elements N/A 30 = 2 elements N/A 45 = 3 elements N/A 60 = 4 elements
Model Code - Flow Rate N/A 15 = 5 gpm Z = without pump N/A 30 = 10 gpm Z = without pump N/A 45 = 15 gpm Z = without pump N/A 60 = 20 gpm Z = without pump
Model Code - Pump N/A G = Gear pump S = Vane pump W = Centrifugal pump Z = Without motor-pump
Electric Motor Voltage N/A L60 = 115 V, Single Phase O60 = 460 V, Three Phase Z = Without motor-pump
Filter Element Size N/A N15DM002 = Dimicron® 2 µm Absolute N15DM010 = Dimicron® 10 µm Absolute N15DM020 = Dimicron® 20 µm Absolute N15DM030 = Dimicron® 30 µm Absolute
Type of Clogging Indicator N/A BM = Differential visual VM2BM.1 C = Differential electrical VM2C.0 E = Standard gauge
Supplementary Equipment N/A 12 = SAE adapters (BSPP connections are standard) MP = Integrated TestPoint for connection to FCU via Minimess Line V = Viton® Seals (NBR seals are standard)
Overall Height N/A 27 in N/A 40 in N/A 52 in N/A 64 in
Overall Length N/A 24 in
Overall Width N/A 17.5 in
Core Products N/A