HY-TTC 48X is an intelligent I/O module that is controlled using CANopen®. It is compliant to CANopen® standard certified by CiA. It is part of a complete and compatible product family for the off-highway industry. The HY-TTC 48X is protected by a compact, automotive-style housing and is highly suited for rough operating conditions. It allows local current control on its PWM outputs.
Unit of Measure

Specifications

Model Code Description

HY-TTC 48X-F11-00-000

Weight

1.43 lb

Operating Temperature [Min]

-40 ºC

Operating Temperature [Max]

85 ºC

Output Type

  • 8x digital OUT 2A high-side, PWM, configurable as timer inputs
  • 8x digital OUT 4A high-side, configurable as analog inputs

Input Type

  • 8 x analog IN 0 to 5 V or 4 to 20 mA/10 bit, configured by software alternative use as resistive measurements
  • 8 x analog IN 0 to 32 V/10 bit, range configurable by SW
  • 4 x current feedback, configurable as digital outputs/ low side 2 A
  • 4 x digital IN (4 timer 10 Hz to 10 kHz)
  • 8 x digital IN

Other

  • Internal: monitoring of board temperature, sensor supply and battery
  • 1 x sensor supply 8.5 V/10.0 V/14.5 V configurable
  • 2 x sensor supply 5 V

Length

147.6 mm

Height

39.8 mm

Width

180.3 mm

Minimum Connector Release Clearance Length

197.7 mm

Minimum Connector Release Clearance Width

202.8 mm

Minimum Connector Release Clearance Height

39.8 mm

Connector

80 Pins

Operating Altitude

0 to 4000 m

Supply Voltage

8 to 32 V

Maximum Peak Voltage

45 V

Maximum Standby Current

0.5 mA

Maximum Idle Current at 9 V

0.15 A

Maximum Current

25 A

CE - Mark

2014/30/EU

E - Mark

ECE-R10 Rev.4

Electromagnetic Compatibility (EMC)

ISO13766, Up to 100 V/m, 20 MHz to 1 GHz

Electrostatic Discharge (ESD)

IEC61000-4-2

Load Dump

ISO7637-2, 173 V, 2 Ohm

Ingress Protection (IP) Class

EN 60529 IP 65, IP67, DIN 40050 IP 6K9K

Climatic

EN 60068-2-1, -14Nb, -2, -78, -30

Vibration, Shock, Bump

IEC 60068-2-29, -64, -27, -32

Equipment Options

Standard

Division

ELECTRONICS

Product Group Family

INPUT/OUTPUT EXPANSION MODULES

Product

MOBILE CONTROLLERS / IO MODULES

CPU Core

CPU Core

  • 16/32-bit Infineon XC2287 microcontroller 80 MHz
  • 768 kB int. Flash, 82 kB int. RAM, 512 kB ext. RAM

Interface

Interface

1x CAN, 125 kbit/s up to 1 Mbit/s

Software

Software

CANopen® slave software preinstalled

Note

N/A All I/Os and interfaces mentioned are protected against short circuit to GND and BAT+.