United States
Contact
Contact Finder Location Finder Feedback for the President Contact us
myHYDAC
Request a Quote
The HLT 2150 is a linear position transmitter which, due to its compact design, was developed in particular for use in applications where space is very limited. A wide range of accessories such as magnets is available for individual adaptation to the particular application.

The HLT 2150 is suited for measuring ranges up to 2.5 m.
Unit of Measure

Specifications

Model Code Description

 N/A HLT 2150-R1-006-C01-1350-000

Type

 N/A Externally Mounted Linear Transducer

Weight

 N/A 1.23 lb

Mounting Type

 N/A Externally Mounted Linear Transducer with M18 x 1.5 Screw-In Flange

Operating Temperature [Min]

 N/A -40 ºC

Operating Temperature [Max]

 N/A 85 ºC

Measuring Range

 N/A 0 to 1350 mm

Output Type

 N/A 4 to 20 mA

Sensor Type

 N/A Magnetostrictive

Output Maximum Hysteresis (Full Scale)

 N/A ≤ ± 0.1

Output Repeatability (Full Scale)

 N/A ≤ ± 0.1

Resolution

 N/A 12 Bit, min. 0.1 mm

Non-Linearity

 N/A ≤ ± 0.05% Full Scale (FS)

Temperature Coefficient

 N/A ≤ ± 0.01% Full Scale (FS)/ ºC

Sampling Rate

 N/A 2 ms

Industry Standards/Certifications

 N/A European Conformity (CE) Mark European Standard (EN) 61000-6-1/2/3/4

Vibration Resistance According to DIN EN 60068-2-6

 N/A ≤ 20 g at 10 to 500 Hz

≤ 15 g at 5 kHz

Shock Resistance According to DIN EN 60068-2-27 (11 ms)

 N/A ≤ 50 g

Operating Pressure

 N/A ≤ 6525 psi

Peak Pressure According to DIN EN ISO 19879

 N/A 9136 psi

Sensor Material

 N/A Rod: Stainless Steel 1.4571

Housing: Stainless Steel 1.4301

Electrical Connection

 N/A Male M12 x 1, 4 Pole

Pin Connection 1

 N/A +Ub

Pin Connection 2

 N/A Not Used

Pin Connection 3

 N/A 0V

Pin Connection 4

 N/A Signal

Power Supply

 N/A 9 to 30 V DC

Current Consumption

 N/A ≤ 100 mA

Residual Ripple of Supply Voltage

 N/A ≤ 250 mVpp

Storage Temperature Range

 N/A -40 to 100 ºC

Fluid Temperature Range

 N/A -40 to 120 ºC

Degree of Protection

 N/A IP 67

Installation Position

 N/A No Restriction

Torque Value

 N/A 50 N·m

Division

 N/A ELECTRONICS

Product Group Family

 N/A POSITION SENSORS

Product

 N/A POSITION SENSOR

Note

N/A Reverse polarity protection of the supply voltage, excess voltage, override and short circuit protection are provided.

Additional Information

N/A The different output signals (analogue current / voltage) enable connection to all HYDAC ELECTRONIC GmbH measurement and control devices as well as connection to standard evaluation systems (e.g. to PLC controls).

The main fields of application for the HLT 2150 are, for example, general positioning tasks in mechanical engineering and in mobile and stationary hydraulics, as a partially integrated solution in hydraulic cylinders.