The HLT 2550 is a linear position transmitter which, due to its compact design, was developed in particular for use in applications where space is very limited. The measuring profile can be individually adapted to various mounting conditions by means of spacers.

The HLT 2550 is suited for measuring ranges up to 3 m. The different output signals (analogue current / voltage) enable connection to all HYDAC ELECTRONIC GmbH measurement and control devices as well as connection to standard evaluation systems (e.g. to PLC controls).
Unit of Measure

Specifications

Type

N/A Profile Linear Transducer

Model Code Description

N/A HLT 2550-L2-006-C01-0300-000

Weight

N/A 2.88 lb

Mounting Type

N/A Compact Profile Linear Transducer with Top Magnet Guidance Joint

Operating Temperature [Min]

N/A -20 ºC

Operating Temperature [Max]

N/A 75 ºC

Measuring Range

N/A 0 to 300 mm

Output Type

N/A 4 to 20 mA

Sensor Type

N/A Magnetostrictive

Output Maximum Hysteresis (Full Scale)

N/A ≤ ± 0.1

Output Repeatability (Full Scale)

N/A ≤ 0.005, ≥ 0.05 mm

Resolution

N/A 12 Bit, ≥ 0.05 mm

Non-Linearity

N/A ≤ ± 0.01% Full Scale (FS), ≥ 0.06 mm

Temperature Coefficient

N/A ≤ ± 0.01% Full Scale (FS)/ ºC Typical

Sampling Rate

N/A Depending on Length:

0.5 ms (Measuring Range ≤ 1200 mm

1.0 ms (Measuring Range ≤ 2400 mm)

2.0 ms (Measuring Range ≤ 3000 mm)

Industry Standards/Certifications

N/A European Conformity (CE) Mark European Standard (EN) 61000-6-1/2/3/4

Vibration Resistance According to DIN EN 60068-2-6

N/A ≤ 10 g at 50 to 2000 Hz

Shock Resistance According to DIN EN 60068-2-27 (11 ms)

N/A ≤ 100 g

Sensor Material

N/A Measuring Body: Aluminum

Electrical Connection

N/A Male M12 x 1, 4 Pole

Pin Connection 1

N/A +Ub

Pin Connection 2

N/A Not Connected

Pin Connection 3

N/A 0V

Pin Connection 4

N/A Signal

Power Supply

N/A 24 V DC ± 20%

Current Consumption

N/A ≤ 100 mA

Residual Ripple of Supply Voltage

N/A ≤ 250 mVpp

Storage Temperature Range

N/A -30 to 85 ºC

Degree of Protection

N/A IP 67

Installation Position

N/A No Restriction

Division

N/A ELECTRONICS

Product Group Family

N/A POSITION SENSORS

Product

N/A POSITION SENSOR

Note

N/A Reverse polarity protection of the supply voltage, excess voltage, override and short circuit protection are provided.

Additional Information

N/A The main fields of application for the HLT 2550 are, for example, general positioning tasks in mechanical engineering and in stationary hydraulics, or as a wear free alternative for existing measuring equipment such as potentiometers