HYDAC INTERNATIONAL GmbH
HYDAC INTERNATIONAL GmbH
66280 Sulzbach/Saar
Germany
Phone: +49 (0) 68 97 509-01
Email: info@hydac.com
Website: www.hydac.com
Print Back
HY-TTC 71 is a powerful electronic control solution for off highway industries with 12V power supply. Due to the highly optimized ratio between number of I/Os and the size of the controller, it can be mounted on machines with very little space. Its compact, automotive-style housing withstands extreme conditions such as humidity, vibrations, temperature changes and mechanical load.
Elec_Contrlrs_TTC50_60_71_77_94.jpg
Unit of Measure
Items Elec_Contrlrs_TTC50_60_71_77_94.jpg
925882
HY-TTC 71
List Price QUOTE
 Elec_Contrlrs_TTC50_60_71_77_94.jpg
925906
HY-TTC 71
List Price QUOTE
Description N/A HY-TTC 71 is a powerful electronic control solution for off highway industries with 12V power supply. Due to the highly optimized ratio between number of I/Os and the size of the controller, it can be mounted on machines with very little space. Its compact, automotive-style housing withstands extreme conditions such as humidity, vibrations, temperature changes and mechanical load.
Model Code Description N/A HY-TTC 71-CP-138K-1.6M-0000-000 N/A HY-TTC 71-CP-138K-1.6M-0010-000
Operating Temperature [Min] N/A -40 ºC
Operating Temperature [Max] N/A 85 ºC
Software N/A C Programming Environment
Connector Type N/A 80 Pins
Operating Altitude N/A 0 to 4000 m
Supply Voltage N/A 7 to 16 V
Maximum Peak Voltage N/A 28 V
Maximum Standby Current N/A 0.5 mA
Maximum Idle Current at 9 V N/A 0.15 A
Maximum Current N/A 35 A
European Conformity (CE) Mark N/A 2014/30/EU
E - Mark N/A ECE-R10 Rev.4
Electromagnetic Compatibility (EMC) N/A CISPR 25 EN 13309 ISO 14982
Electrostatic Discharge (ESD) N/A ISO 10605
Electrical N/A ISO 16750-2 ISO 7637-2,-3 Starting Profile, Level II (4,5 V), Functional Status A
Ingress Protection (IP) Class N/A EN 60529 IP67 ISO 20653 IP6k9k
Climatic N/A ISO 16750-4
Mechanical N/A ISO 16750-3
Communication Profile N/A C Programming
Equipment Options N/A Standard N/A Developer Version
Length N/A 143.13 mm
Depth N/A 42.77 mm
Width N/A 216.32 mm
Minimum Connector Release Clearance Height N/A 42.77 mm
Minimum Connector Release Clearance Length N/A 197.7 mm
Minimum Connector Release Clearance Width N/A 216.32 mm
Weight N/A 1.30 lb
CPU Core N/A
  • 16/32-bit Infineon XC2288 safety microcontroller, 80 MHz, 1.6 MB int. Flash, 138 kB int. RAM
  • 32 kB ext. EEPROM
Interface N/A
  • 1 x CAN, 125 kbit/s up to 1 Mbit/s Optional CAN termination via 2 connector pins
Output Type N/A
  • 6 x digital OUT, up to 2.5 A, high side with freewheeling diode for higher inductive loads
  • 12 x digital OUT, up to 2.5 A, high side for individual outputs
Input Type N/A
  • 10 x analog IN, 0 to 15V Pull-Up in digital IN mode
  • 10 x analog IN, 0 to 15V Pull-Down in digital IN mode
  • 1 x digital timer IN (0.1 Hz to 10kHz) low side, with voltage measurement
  • 2 x analog IN, 0 to 5 V
  • 1 x analog IN, configurable in software 0 - 5V, 0 - 25 mA, 0 - 65 kOhm digital IN low side
  • 1 x analog IN, 0 - 25 mA
Other N/A
  • Internal: monitoring of board temperature, sensor supply and battery
  • 1 x sensor supply 5 V, 100 mA
  • 3 x analog sensor ground
  • 1 x digital sensor ground
Note N/A All I/Os and interfaces mentioned are protected against short circuit to GND and BAT+.
Core Products N/A
Division N/A ELECTRONICS
Product Group Family N/A MOBILE CONTROLLERS
Product N/A MOBILE CONTROLLERS / IO MODULES