HYDAC Technology Corporation - HLT 2100 Externally Mounted Linear Transducer

Unit of Measure

Items	921482 HLT 2100 Externally Mounted Linear Transducer List Price QUOTE	921553 HLT 2100 Externally Mounted Linear Transducer List Price QUOTE	922646 HLT 2100 Externally Mounted Linear Transducer List Price QUOTE
Description	N/A The sensor works on the principle of magnetostriction. This measuring principle determines with high accuracy the position, distance and/or speed and is based on elapsed time measurement. Utilizing this non-contact and wear-free measuring system, HYDAC offers a version in a pressure-resistant, tubular casing in stainless steel, for direct installation into hydraulic cylinders.
Model Code Description	N/A HLT 2100-R1-M08-C01-0120-000	N/A HLT 2100-R1-K01-C01-0752-000	N/A HLT 2100-R1-K01-C01-3000-000
Type	N/A Externally Mounted Linear Transducer
Weight	N/A 2.88 lb
Mounting Type	N/A Externally Mounted Linear Transducer with M18 x 1.5 Screw-In Flange
Operating Temperature [Min]	N/A 0 ºC
Operating Temperature [Max]	N/A 70 ºC
Measuring Range	N/A 0 to 120 mm	N/A 0 to 752 mm	N/A 0 to 3000 mm
Output Type	N/A 4 to 20 mA
Sensor Type	N/A Magnetostrictive
Output Maximum Hysteresis (Full Scale)	N/A 0.02 mm (Measuring range less than or equal to 1500 mm) 0.1 mm (Measuring range greater than 1500 mm)
Output Repeatability (Full Scale)	N/A ≤ 0.005 to ≤ 0.05 mm (Depends on Length)
Resolution	N/A 16 Bit; min. 0.005 mm
Non-Linearity	N/A ±0.1 mm (Measuring Range ≤ 1500 mm) ±0.15 mm (Measuring Range > 1500 mm)
Temperature Coefficient	N/A ≤ ± 0.004% Full Scale (FS)/ ºC
Sampling Rate	N/A Depending on Length: ≤ 1 m: 0.5 ms ≤ 2 m: 1.0 ms ≤4 m: 2.0 ms
Industry Standards/Certifications	N/A European Conformity (CE) Mark European Standard (EN) 61000-6-1/2/3/4
Vibration Resistance According to DIN EN 60068-2-6	N/A ≤ 10 g at 50 to 2000 Hz
Shock Resistance According to DIN EN 60068-2-27 (11 ms)	N/A ≤ 100 g
Operating Pressure	N/A ≤ 6525 psi
Peak Pressure According to DIN EN ISO 19879	N/A 10875 psi	N/A 10876 psi	N/A 10877 psi
Sensor Material	N/A Rod: Stainless Steel 1.4571 Housing: Aluminum
Electrical Connection	N/A Male M16, 8 Pole	N/A Jacketed Cable, Length 1 Meter	N/A Jacketed Cable, Length 1 Meter
Pin Connection 1	N/A Not Connected	N/A	N/A
Pin Connection 2	N/A 0V (Analogue Output)	N/A	N/A
Pin Connection 3	N/A Start Point	N/A	N/A
Pin Connection 4	N/A End Point	N/A	N/A
Pin Connection 5	N/A Signal	N/A	N/A
Pin Connection 6	N/A 0V	N/A	N/A
Pin Connection 7	N/A +Ub	N/A	N/A
Pin Connection 8	N/A Not Connected	N/A	N/A
Power Supply	N/A 24 V DC ± 10%
Current Consumption	N/A ≤ 100 mA
Residual Ripple of Supply Voltage	N/A ≤ 250 mVpp
Brown Wire Core	N/A 0V (Analog Output)
Green Wire Core	N/A Start Point
Yellow Wire Core	N/A End Point
Blue Wire Core	N/A +Ub
Pink Wire Core	N/A 0V
Grey Wire Core	N/A Signal
Storage Temperature Range	N/A -30 to 85 ºC
Degree of Protection	N/A IP 65
Installation Position	N/A No Restriction
Torque Value	N/A 50 N·m
Note	N/A Reverse polarity protection of the supply voltage, excess voltage, override and short circuit protection are provided.
Additional Information	N/A The different output signals (analogue current / voltage) enable connection to all HYDAC ELECTRONIC GmbH measurement and control devices as well as connection to standard evaluation systems (e.g. to PLC controls). External set inputs for the analogue start point and end point offer an additional possibility of a customised adjustment. HLT 2100 is primarily used in stationary applications as partially integrated solutions in hydraulic cylinders.
Core Products	N/A
Division	N/A ELECTRONICS
Product Group Family	N/A POSITION SENSORS
Product	N/A POSITION SENSOR