Print Back
IO-Link is the communication between the sensor/actuator (IO-Link device) and an IO-Link master based on a point-topoint interface. This technology has been integrated into the pressure switch series EDS 820.
Elect_PressSwtch_EDS820.jpg
Unit of Measure
Items Elect_PressSwtch_EDS820.jpg
923503
EDS 820 IO-Link Pressure Switch
List Price QUOTE
Elect_PressSwtch_EDS820.jpg
925909
EDS 820 IO-Link Pressure Switch
List Price QUOTE
Elect_PressSwtch_EDS820.jpg
926371
EDS 820 IO-Link Pressure Switch
List Price QUOTE
Description N/A IO-Link is the communication between the sensor/actuator (IO-Link device) and an IO-Link master based on a point-to point interface. This technology has been integrated into the pressure switch series EDS 820.
Model Code Description N/A EDS 824-F31-0250-000 N/A EDS 824-F31-0400-000 N/A EDS 827-06000-F31-000(PSI)
Industry Standards/Certifications N/A European Conformity (CE) Mark: European Standard (EN) 61000-6-1 / 2 / 3 / 4
Type N/A Pressure Switch
Overload Pressure N/A 500 bar N/A 800 bar N/A 11600 psi
Weight N/A 0.143 lb
Switching Current N/A 0.250 A
Operating Temperature [Min] N/A -25 ºC
Operating Temperature [Max] N/A 85 ºC
Housing Material N/A Stainless Steel
Connection Size N/A G1/4 A ISO 1179-2 with 0.5 mm orifice
Switch Type N/A PNP Transistor outputs
Electrical Connection N/A Male M12 x 1, 4 Pole
Power Supply N/A 10 to 32 V DC
Residual Ripple of Supply Voltage N/A ≤ 5%
Power Consumption N/A ≤ 1 W without active outputs
Operating Pressure [Min] N/A 0 bar N/A 0 bar N/A 0 psi
Operating Pressure [Max] N/A 250 bar N/A 400 bar N/A 6000 psi
Burst Pressure N/A 1250 bar N/A 2000 bar N/A 29000 psi
Compensated Temperature Range N/A -25 to 85 ºC
Degree of Protection N/A IP 67
Pin Connection 1 N/A +UB
Pin Connection 2 N/A Switching Output (SP2)
Pin Connection 3 N/A 0V
Pin Connection 4 N/A IO-Link Communication / Switching Output (SP1)
Fluid Temperature Range N/A -25 to 125 ºC
Storage Temperature Range N/A -40 to 100 ºC
Output Typical Accuracy According to DIN 16086, Terminal Based (Full Scale) N/A ≤ ± 0.5 %
Output Maximum Accuracy According to DIN 16086, Terminal Based (Full Scale) N/A ≤ ± 1 %
Output Typical Temperature Compensation Zero Point (Full Scale) N/A ≤ ± 0.02 %/°C
Output Maximum Temperature Compensation Zero Point (Full Scale) N/A ≤ ± 0.03 %/°C
Output Typical Temperature Compensation Span (Full Scale) N/A ≤ ± 0.02 %/°C
Output Maximum Temperature Compensation Span (Full Scale) N/A ≤ ± 0.03 %/°C
Maximum Output Repeatability (Full Scale) N/A ≤ ± 0.1 %
Output Reaction Time N/A < 10 ms
Output Long-Term Drift Per Year (Full Scale) N/A ≤ ± 0.3 %
Vibration Resistance According to DIN EN 60068-2-6 at 10 to 500 Hz N/A ≤ 25 g
Shock Resistance According to DIN EN 60068-2-6 at 10 to 500 Hz Per 6 ms N/A ≤ 50 g
Recommended Tightening Torque N/A 20 N·m
IO-Link Revision N/A V1.1 / Support V1.0
Transmission Rate, Baud Rate N/A 38.4 k Baud (COM2)
Minimum Cycle Time N/A 2.5 ms
Process Data Width N/A 16 Bit
SIO Mode Supported N/A Yes
M-Sequence Capability N/A PREOPERATE = TYPE_0

OPERATE = TYPE_2_2

ISDU supported
IO Device Description (IODD) N/A Download at: www./ioddfinder.io-link.com
Additional Information N/A The advantages:

Process data, parameters and diagnostic information of the pressure switch can be transmitted via a standard cable (SDCI mode). An integrated LED display provides information on the operating mode and the switching statuses.

Simple exchange - the IO-Link master saves the parameters of the connected pressure switch and transmits them to the newly connected pressure transmitter when replaced. Thus, time-consuming new parameterisations will no longer be required.

If IO-Link is not used, the sensor functions as a pressure switch with two switching outputs (SIO mode).

To create customer-specific small series or to duplicate sensor settings across the system, the sensor can also be easily adjusted outside the system to suit the particular application, with the HYDAC Programming Device HPG P1‑000, the HYDAC Programming Adapter ZBE P1‑000 or by means of the Portable Data Recorder HMG 4000.

Typical fields of application are machine tools, handling and assembly automation, intralogistics or the packaging industry.
Core Products N/A
Division N/A ELECTRONICS
Product Group Family N/A PRESSURE SWITCHES
Product N/A PRESSURE SWITCHES