HYDAC Technology Corporation - HDA 4100 Absolute Shipping Approval Pressure Transducer

Unit of Measure

Items	921184 HDA 4100 Absolute Shipping Approval Pressure Transducer List Price QUOTE	926868 HDA 4100 Absolute Shipping Approval Pressure Transducer List Price QUOTE
Description	N/A This pressure transmitter has been specially developed for shipbuilding applications and is based on the HDA 4000 series. The HDA 4100 has a ceramic measurement cell with thick-layer strain gauge for measuring absolute pressure in the low pressure range. The evaluation electronics converts the measured pressure into a proportional analogue signal of 4 .. 20 mA. The electronic module is completely potted to protect it against humidity, vibrations and shock, and is enclosed in a solid Stainless Steel housing.
Model Code Description	N/A HDA 4145-A-01,0-S00-F1	N/A HDA 4146-A-02,5-S00-F1
Industry Standards/Certifications	N/A CE Mark: EN 61000-6-1 / 2 / 3 / 4
Type	N/A Absolute Shipping Approval Pressure Transducer
Mechanical Connection Type	N/A G1/4 A ISO 1179-2, Male
Weight	N/A 0.33 lb
Housing Material	N/A Stainless Steel
Burst Pressure	N/A 5 bar	N/A 12 bar
Output Signal	N/A 4 to 20 mA
Wetted Material	N/A Mechanical Connection: Stainless Steel Sensor Cell: Ceramic Seal: FKM
Electrical Connection	N/A Male, EN175301-803, 3 Pole + PE	N/A Male, M12 x 1, 4 Pole
DC Power Supply Voltage	N/A 10 to 32 V
Output Typical Accuracy According to DIN 16086, Terminal Based (Full Scale)	N/A ≤ ± 0.5 %
Output Maximum Accuracy According to DIN 16086, Terminal Based (Full Scale)	N/A ≤ ± 1
Output Typical Accuracy Best Fit Straight Line (B.F.S.L) (Full Scale)	N/A ≤ ± 0.25 %
Output Maximum Accuracy Best Fit Straight Line (B.F.S.L) (Full Scale)	N/A ≤ ± 0.5 %
Output Typical Temperature Compensation Zero Point (Full Scale)	N/A ≤ ± 0.02 %/°C
Output Maximum Temperature Compensation Zero Point (Full Scale)	N/A ≤ ± 0.03 %/°C
Output Typical Temperature Compensation Span (Full Scale)	N/A ≤ ± 0.02 %/°C
Output Maximum Temperature Compensation Span (Full Scale)	N/A ≤ ± 0.03 %/°C
Output Maximum Non-Linearity at Maximum Setting to DIN 16086 (Full Scale)	N/A ≤ ± 0.5 %
Output Maximum Hysteresis (Full Scale)	N/A ≤ ± 0.4 %
Output Repeatability (Full Scale)	N/A ≤ ± 0.1 %
Output Rise Time	N/A ≤ 1 ms
Output Long-Term Drift Per Year (Full Scale)	N/A ≤ ± 0.3 %
Vibration Resistance According to DIN EN 60068-2-6 at 10 to 500 Hz	N/A ≤ 20 g
Pin Connection 1	N/A Signal +
Pin Connection 2	N/A Signal -	N/A Not Connected
Pin Connection 3	N/A Not Connected	N/A Signal -
Pin Connection 4	N/A	N/A Not Connected
Pin Connection (Ground)	N/A Housing	N/A
Residual Ripple of Supply Voltage	N/A ≤ 5 %
Life Expectancy (0 to 100% Full Scale (FS))	N/A > 10 Million Cycles
Overload Pressure	N/A 3 bar	N/A 8 bar
Operating Temperature [Min]	N/A -25 ºC
Operating Temperature [Max]	N/A 85 ºC
Compensated Temperature Range	N/A -25 to 85 ºC
Storage Temperature Range	N/A -30 to 100 ºC
Fluid Temperature Range	N/A -25 to 85 ºC
Operating Pressure [Min]	N/A 0 bar
Operating Pressure [Max]	N/A 1 bar	N/A 2.5 bar
Degree of Protection	N/A IP 67
Torque Value	N/A 20 N·m
Additional Information	N/A For use in the shipping industry, these pressure transmitters have been approved by the following organizations. American Bureau of Shipping Lloyds Register of Ships Det Norske Veritas / Germanischer Lloyd Bureau Veritas
Note	N/A Reverse polarity protection of the supply voltage, excess voltage, override and short circuit protection are provided.
Core Products	N/A