HYDAC INTERNATIONAL GmbH
HYDAC INTERNATIONAL GmbH
66280 Sulzbach/Saar
Germany
Phone: +49 (0) 68 97 509-01
Email: info@hydac.com
Website: www.hydac.com
Print Back
HAT 1200 is an absolute measuring single turn angle sensor.

Thanks to its non-contact magnetic measuring method and its robust design, the HAT 1200 is ideally suited for the measurement of the rotational angle in mobile machines.

Due to its two-chamber design, the electronic unit is completely encapsulated which means it meets IP 6K9K if the electrical connection is carried out accordingly.
Unit of Measure

Specifications

Type

 Angle Sensor

Model Code Description

 HAT 1236-C01-360L-P01-D106-M01-S2PD-000

Measuring Range

 0 to 360 º

Direction of Rotation

 No Orientation Restrictions

Mounting Type

 D-Shape, Length 10 mm, Diameter 6 mm

Operating Temperature [Min]

 -40 ºC

Operating Temperature [Max]

 85 ºC

Speed [Max]

 17000 rpm

Max. Axial Load

 60 N

Max. Radial Load

 100 N

Output Type

 4 to 20 mA

Resolution

 12 Bit

Housing Material

 Stainless Steel

Shaft Material

 Stainless Steel

Accuracy (At Room Temperature)

 ± 0.15º Typical, ± 0.3º Max.

Accuracy (Over the Temperature Range)

 ± 0.075º / 10 K Typical, ± 0.15º / 10 K Max.

Repeatability

 ≤ ± 0.05 º

Characteristic Curve

 Linear, CCW

E13 Mark

 E13*10R00*10R05*14136*00

Vibration Resistance According to DIN EN 60068-2-6: 2010

 7.5 mm (5 Hz ≤ f < 8.2 Hz), 2 g (8.2 Hz ≤ f < 2000 Hz)

Shock Resistance According to DIN EN 60068-2-27: 2011

 20 g (11 ms in 3 Axes)

Sensor Type

 Single Turn Angle Sensor

Degree of Protection

 IP 67, IP 6K9K (Electronics)

Storage Temperature Range

 -40 to 85 ºC

Industry Standards/Certifications

 European Standard (EN) 61000-6-1 / 2 / 3 / 4

Power Supply

 9 to 36 V DC

Residual Ripple of Supply Voltage

 ≤ 5%

Weight

 0.264 lb

Performance Level

 Based on DIN EN ISO 13849-1: 2008 PL d and Architecture Category 2

Safety Integrity Level

 Based on DIN EN 61508: 2010 SIL 2

Power Consumption

 1.4 W

Life Expectancy

 1.5 * 109 Rotations at 3000 rpm

Electrical Connection

 Male M12 x 1, 4 Pole

Pin Connection 1

 +UB

Pin Connection 2

 Not Connected

Pin Connection 3

 0V

Pin Connection 4

 Signal

Pin Connection 5

 Not Connected

Division

 ELECTRONICS

Product Group Family

 POSITION SENSORS

Product

 POSITION SENSOR

Note

N/A Reverse polarity protection of the supply voltage, overvoltage, override and short circuit protection are provided.

Additional Information

N/A The sensors meet the safety requirements according to SIL2 (IEC 61508) or PL d (ISO 13849), respectively.

The sensor is therefore suitable for a large variety of applications in the automobile industry and in mobile work machines, especially for applications with increased safety requirements.

Especially for the use in public traffic vehicles, HAT 1200 has E13 approval (approved for road vehicles) in accordance with ECE type approval.