HYDAC INTERNATIONAL GmbH
HYDAC INTERNATIONAL GmbH
66280 Sulzbach/Saar
Germany
Phone: +49 (0) 68 97 509-01
Email: info@hydac.com
Website: www.hydac.com
Print Back
HY-TTC 60 is a powerful electronic control solution for off-highway industries that is well-suited for the rough conditions in which it is used. It is part of a complete and compatible product family and is protected by a compact, automotive-style housing suited to mobile applications.
Unit of Measure

Specifications

Model Code Description

 HY-TTC 60-CD-594K-768K-0000-000

Operating Temperature [Min]

 -40 ºC

Operating Temperature [Max]

 85 ºC

Software

 CODESYS 2.3 Including Support for CANopen

Connector Type

 80 Pins

Operating Altitude

 0 to 4000 m

Supply Voltage

 8 to 32 V

Maximum Peak Voltage

 45 V

Maximum Standby Current

 0.5 mA

Maximum Idle Current at 9 V

 0.15 A

Maximum Current

 25 A

European Conformity (CE) Mark

 2014/30/EU

E - Mark

 ECE-R10 Rev.4

Electromagnetic Compatibility (EMC)

 ISO13766, up to 200 V/m, 20 MHz to 1GHz

Electrostatic Discharge (ESD)

 IEC61000-4-2

Load Dump

 ISO7637-2, 173 V, 2 Ohm

Ingress Protection (IP) Class

 DIN 40050 IP 6K9K EN 60529 IP 65, IP67

Climatic

 EN 60068-2-1, -14Nb, -2, -78, -30

Vibration, Shock, Bump

 IEC 60068-2-29, -64, -27, -32

Communication Profile

 CODESYS

Equipment Options

 Standard

Weight

 1.43 lb

Division

 ELECTRONICS

Product Group Family

 MOBILE CONTROLLERS

Product

 MOBILE CONTROLLERS / IO MODULES

Dimensions

Length

 147.6 mm

Depth

 39.8 mm

Width

 180.3 mm

Minimum Connector Release Clearance Height

 39.8 mm

Minimum Connector Release Clearance Length

 197.7 mm

Minimum Connector Release Clearance Width

 202.8 mm

CPU Core

CPU Core
  • 16/32-bit Infineon XC2287 microcontroller, 80 MHz, 768 kB int. Flash, 82 kB int. RAM, 512 kB ext. RAM
  • 64 kbit EEPROM

Interface

Interface
  • 1 x RS-232 and 1 x LIN serial interfaces
  • 2 x CAN, 125 kbit/s up to 1 Mbit/s

Output Type

Output Type
  • 8 x digital OUT 2 A high-side, PWM, configurable as timer inputs
  • 8 x digital OUT 4 A high-side, configurable as analog inputs

Input Type

Input Type
  • 8 x analog IN 0 to 5 V or 4 to 20 mA / 10 bit, configured by software alternative use as resistive measurements
  • 8 x analog IN 0 to 32 V / 10 bit, range configurable by SW
  • 4 x current feedback, configurable as digital outputs/ lowside 2 A
  • 4 x digital IN (4 timer 0.1 Hz to 10 kHz)
  • 8 x digital IN

Other

Other
  • Internal: monitoring of board temperature, sensor supply and battery
  • 1 x sensor supply 8.5 V/10.0V/14.5V configurable
  • 2 x sensor supply 5 V

Note

N/A All I/Os and interfaces mentioned are protected against short circuit to GND and BAT+.