Part Number 2212013, In-Line Industrial Filter - LF Series (1500 PSI) On HYDAC Technology Corporation

Unit of Measure

Specifications | Technical Specifications | Dimensions | Features | Application

Type	N/A Medium Pressure Filter
Model Code Description	N/A LFW/HC660IF50B1.0/12B3
Filter Type	N/A Inline mount 4 mounting holes
Size	N/A 660
Port Connection	N/A 1 1/2 in.
Port Configuration	N/A SAE
Material	N/A Wire Mesh/HC
Indication Type	N/A B = Visual pop-up with automatic reset
Seals	N/A Nitrile Rubber (NBR)
Weight	N/A 11.02 kg24.3 lb
Port Configuration	N/A SAE-12 Straight Thread O-Ring Boss Ports
BUn	N/A Medium Pressure
Division	N/A HYDRAULIC AND LUBE FILTERS
Product Group Family	N/A FILTERS-MEDIUM PRESSURE(361 TO 2999 PSI)
Product	N/A FILTERS-MED PRESSURE (361 - 2999PSI)

Flow Capacity	N/A 174 gpm660 L/min
Filter Rating	N/A 50 µm
Construction Material for Head	N/A Cast Aluminum
Mounting Method	N/A 4 Mounting Holes
Flow Direction	N/A Outside - Inside
Bypass Valve Cracking Pressure	N/A 3 bar43 psid
Fatigue Housing Pressure Rating at 1 Million Cycles	N/A 100 bar1500 psi
Fluid Temperature Range	N/A -22 to 212 ºF-30 to 100 ºC
Note for Fluid Temperature Range	N/A Consult HYDAC for applications operating below -22 ºF (-30 ºC)
Optional ΔP Indicator Trip pressure (10%)	N/A 29 psid2 bar
Standard ΔP Indicator Trip pressure (-10%)	N/A 72 psid5 bar
Fluid Compatibility	N/A Compatible with all hydrocarbon based, synthetic, water glycol, oil/water emulsion, and high water based fluids when the appropriate seals are selected.

Dimension b1	N/A 6.26 in159 mm
Dimension h1	N/A 18.40 in467.5 mm

N/A

Non-welded housing design reduces stress concentrations and prevents fatigue failure.
- Aluminum alloy is water tolerant - anodization is not required for water based fluids (HWBF).
  - Inlet & outlet port options include NPT, BSPP and SAE straight thread O-ring boss to allow easy installation with maximum flexibility.
    - O-ring seals are used to provide positive, reliable sealing. Choice of O-ring materials (nitrile rubber, fluorocarbon elastomer, ethylene propylene rubber) provides compatibility with petroleum oils, synthetic fluids, water-glycols, oil/water emulsions, and high water based fluids.
      - Screw-in bowl mounted below the filter head requires minimal clearance to remove the element for replacement, and contaminated fluid cannot be washed downstream when element is serviced. HYDAC differential Pressure Indicators have no external dynamic seal. This results in a high system reliability due to magnetic actuation, thus eliminating a potential leak point. A poppet-type bypass valve (optional) is separate from the main flow path, in the filter head, to provide positive sealing during normal operation and fast opening during cold starts and flow surges. For special finishes and coatings - consult HYDAC for minimum quantities, availability and pricing.

N/A

Type