Part Number 924074, HDA 4800 Pressure Transducer for Steel Works On HYDAC Technology Corporation

This high-precision pressure transmitter was specially developed and adapted for the sophisticated measurement demands of steelworks technology.

The instrument has a very robust sensor cell with a thin-film strain gauge on a stainless steel membrane.

Its outstanding specifications in respect of temperature effect (temperature drift for zero point and span are in each case max. ≤ ± 0.01 % FS/ºC) and accuracy (≤ ± 0.125 % FS typ.) make it ideally suited for use in the environmental conditions found in steelworks.

The excellent EMC characteristics guarantee signal stability during the harshest high frequency, electromagnetic interference.

Additional protection against humidity and vibrations is achieved by encapsulation. A heat shrink sleeving is used to protect the sensor from bending.

Unit of Measure

Specifications | Note

Specifications

Model Code Description	N/A HDA 4840-A-0350-424(6m)
Mechanical Connection Type	N/A G1/4 A ISO 1179-2 with 0.5 mm Orifice, Male
Weight	N/A 1.59 lb
Input Burst Pressure	N/A 2000 bar
Mechanical Connection Size	N/A G1/4
Output Signal	N/A 4 to 20 mA
Wetted Material	N/A Stainless Steel and FKM Seal
Electrical Connection	N/A Open Ended Cable
Includes	N/A Additional protection against water, humidity and vibration. Encapsulation of the device, cable outlet with strain relief, heat shrink sleeving
Output Typical Accuracy According to DIN 16086, Terminal Based (Full Scale)	N/A ≤ ± 0.125 %
Output Maximum Accuracy According to DIN 16086, Terminal Based (Full Scale)	N/A ≤ ± 0.25
Output Typical Accuracy Best Fit Straight Line (B.F.S.L) (Full Scale)	N/A ≤ ± 0.06 %
Output Maximum Accuracy Best Fit Straight Line (B.F.S.L) (Full Scale)	N/A ≤ ± 0.125 %
Output Typical Temperature Compensation Zero Point (Full Scale)	N/A ≤ ± 0.005 %/°C
Output Maximum Temperature Compensation Zero Point (Full Scale)	N/A ≤ ± 0.01 %/°C
Output Typical Temperature Compensation Over Range (Full Scale)	N/A ≤ ± 0.005 %/°C
Output Maximum Temperature Compensation Over Range (Full Scale)	N/A ≤ ± 0.01 %/°C
Output Maximum Non-Linearity According to DIN 16086 Terminal Based (Full Scale)	N/A ≤ ± 0.15 %
Output Maximum Hysteresis (Full Scale)	N/A ≤ ± 0.1 %
Output Repeatability (Full Scale)	N/A ≤ ± 0.05 %
Output Rise Time	N/A ≤ 1 ms
Output Long-Term Drift Per Year (Full Scale)	N/A ≤ ± 0.1 %
CUL^®US Mark	N/A Certificate No.: E318391
Note for Direct Current (DC) Supply Voltage When Applied According to UL Specifications	N/A Limited energy - According to 9.3 UL 61010; Class 2; UL 1310/1585; LPS UL 60950
Vibration Resistance According to DIN EN 60068-2-6 at 10 to 500 Hz	N/A ≤ 25 g
Current Consumption	N/A ≤ 25 mA
Residual Ripple of Supply Voltage	N/A ≤ 5 %
Life Expectancy (0 to 100% Full Scale (FS))	N/A > 10 Million Cycles
Brown Wire Core	N/A Signal +
Black Wire Core	N/A Not Used
Blue Wire Core	N/A Signal -
Input Overload Pressure	N/A 900 bar
Operating Temperature [Min]	N/A -25 ºC
Operating Temperature Range	N/A 85 ºC
Compensated Temperature Range	N/A -25 to 85 ºC
Storage Temperature Range	N/A -40 to 100 ºC
Fluid Temperature Range	N/A -25 to 100 ºC
Operating Pressure [Min]	N/A 0 bar
Operating Pressure [Max]	N/A 350 bar
Protection Class According to DIN EN 605293	N/A IP 68
Torque Value	N/A 20 N·m15 lb·ft
Industry Standards/Certifications	N/A CE Mark EN 61000-6-1/2/3/4
DC Power Supply Voltage	N/A 10 to 30 V
Division	N/A ELECTRONICS
Product Group Family	N/A PRESSURE TRANSDUCERS
Product	N/A PRESSURE TRANSDUCERS

Note

N/A Reverse polarity protection of the supply voltage, excess voltage, override and short circuit protection are provided.
Subject to technical modifications.

Specifications

Model Code Description

Mechanical Connection Type

Weight

Input Burst Pressure

Mechanical Connection Size

Output Signal

Wetted Material

Electrical Connection

Includes

Output Typical Accuracy According to DIN 16086, Terminal Based (Full Scale)

Output Maximum Accuracy According to DIN 16086, Terminal Based (Full Scale)

Output Typical Accuracy Best Fit Straight Line (B.F.S.L) (Full Scale)

Output Maximum Accuracy Best Fit Straight Line (B.F.S.L) (Full Scale)

Output Typical Temperature Compensation Zero Point (Full Scale)

Output Maximum Temperature Compensation Zero Point (Full Scale)

Output Typical Temperature Compensation Over Range (Full Scale)

Output Maximum Temperature Compensation Over Range (Full Scale)

Output Maximum Non-Linearity According to DIN 16086 Terminal Based (Full Scale)

Output Maximum Hysteresis (Full Scale)

Output Repeatability (Full Scale)

Output Rise Time

Output Long-Term Drift Per Year (Full Scale)

CUL®US Mark

Note for Direct Current (DC) Supply Voltage When Applied According to UL Specifications

Vibration Resistance According to DIN EN 60068-2-6 at 10 to 500 Hz

Current Consumption

Residual Ripple of Supply Voltage

Life Expectancy (0 to 100% Full Scale (FS))

Brown Wire Core

Black Wire Core

Blue Wire Core

Input Overload Pressure

Operating Temperature [Min]

Operating Temperature Range

Compensated Temperature Range

Storage Temperature Range

Fluid Temperature Range

Operating Pressure [Min]

Operating Pressure [Max]

Protection Class According to DIN EN 605293

Torque Value

Industry Standards/Certifications

DC Power Supply Voltage

Division

Product Group Family

Product

Note

CUL^®US Mark