HYDAC INTERNATIONAL GmbH
HYDAC INTERNATIONAL GmbH
66280 Sulzbach/Saar
Germany
Phone: +49 (0) 68 97 509-01
Email: info@hydac.com
Website: www.hydac.com
Print Back
The HPT differential pressure transmitter series was specially developed to provide an low-cost solution for differential pressure. Via an internal piston movement, the generated differential pressure is detected by means of a Hall sensor.

The sensor reacts to increasing contamination degree of the element by increasing the differential pressure signal. The media compatibility includes hydraulic oils, lubrication oils, HFA, HFB and HFD as well as all further environment-friendly fluids.

The differential pressure transmitter is used in systems requiring a continuous, intelligent monitoring of the differential pressure. It is used both in mobile and in industrial applications.
Unit of Measure

Specifications

Model Code Description

 N/A HPT 506-C-08.0-S-000

DC Power Supply Voltage

 N/A 8 to 30 V

Division

 N/A ELECTRONICS

Product Group Family

 N/A ACCESSORIES-ELECTRONIC

Product

 N/A ELEC ACCESSORIES / MISC

Environmental Conditions

Industry Standards/Certifications

 N/A CE Mark EN 61000-6-1/2/3/5

Vibration Resistance According to DIN EN 60068-2-6 at 10 to 500 Hz

 N/A ≤ 20 g

Operating Temperature [Min]

 N/A -20 ºC

Operating Temperature (Max)

 N/A 85 ºC

Compensated Temperature Range

 N/A -20 to 70 ºC

Storage Temperature Range

 N/A -40 to 100 ºC

Fluid Temperature Range

 N/A -20 to 85 ºC

Protection Class According To DIN EN 605293

 N/A IP 67

Other Data

Weight

 N/A 0.37 lb

Electrical Connection

 N/A Male M12, 4 Pole

Current Consumption

 N/A ≤ 25 mA

Residual Ripple of Supply Voltage

 N/A ≤ 5 %

Life Expectancy (0 to 100% Full Scale (FS))

 N/A > 1 Million Cycles

Input Data

Input Burst Pressure

 N/A 1600 bar

Mechanical Connection Type

 N/A G 1/2 HN 28-22, Male

Housing Material

 N/A Stainless Steel

Wetted Material

 N/A Stainless Steel, O-Ring NBR and profile Seal Ring PTFE

Output Permitted Load Resistance

 N/A RLmax=(UB - 3 V)/20 mA)

Delta P Measuring Range

 N/A 8 bar

Operating Pressure [Max]

 N/A 420 bar

Torque Value

 N/A 100 N·m

Output Data

Output Signal

 N/A 4 to 20 mA, 3 Conductor

Output Typical Accuracy According to DIN 16086, Terminal Based (Full Scale)

 N/A ≤ ± 3 %

Output Maximum Accuracy According to DIN 16086, Terminal Based (Full Scale)

 N/A ≤ ± 5 % in rel. to Delta P

Output Long-Term Drift Per Year (Full Scale)

 N/A ≤ ± 0.5 %

Pin Connection 1

 N/A +UB

Pin Connection 2

 N/A No Connection

Pin Connection 3

 N/A 0 Voltage

Pin Connection 4

 N/A Signal