United States

Change country website

Show all countries
Contact
Contact Finder Location Finder Feedback for the President Contact us
myHYDAC
Search
The HYDAC flow switches of the HFS 2000 series are based on a variable area float principle. The measuring medium deflects a springloaded float in the direction of flow, depending on the flow rate. A reed contact is fitted outside of the device, therefore separated from the fluid circuit. When the magnet inside the float reaches the pre-set position, the reed contact will switch.
Unit of Measure

Specifications

Model Code Description

 HFS 2145-1S-0001-0004-7-B-1-000

Industry Standards/Certifications

 European Conformity (CE) Mark Directive 2006/95/EC

European Conformity (CE) Mark Directive 2004/108/EC

Type

 Mechanical Pressure Switches

Pressure [Max]

 3625 psi

Weight

 3.5 lb

Switching Current

 3 A

Operating Temperature [Min]

 -4 ºF

Operating Temperature [Max]

 158 ºF

Housing Material

 Brass, Nickel-Plated

Connection Size

 G1/4, Female on Both Ends

Switch Type

 1 Normally Open Reed Contact

Electrical Connection

 Male EN175301-803 (DIN 43650)

Accuracy

 ≤ ± 10% Full Scale (FS)

Degree of Protection

 IP 65

Pin Connection 1

 Center

Pin Connection 2

 N/O Contact

Pin Connection 3

 Not used

Pin Connection (Ground)

 Housing

Fluid Temperature Range

 -4 to 248 ºF

Viscosity Range

 30 to 600 cSt

Output Repeatability (Full Scale)

 2 %

Switching Capacity

 100 V·A230 V

Switching Range

 1 to 4 L/min

Pressure Drop

 0.02 to 0.4 psi

Division

 FILTER SYSTEMS

Product Group Family

 PORTABLE OFFLINE FILTRATION

Product

 OFF-LINE FILTERS

Note

N/A The medium must not contain solid particles. We recommend using contamination strainers.

External magnetic fields can affect the switching contact. Ensure sufficient distance from magnetic fields (e.g. from electric motors).