Print Back
The HLT 2150 is a linear position transmitter which, due to its compact design, was developed in particular for use in applications where space is very limited. A wide range of accessories such as magnets is available for individual adaptation to the particular application.

The HLT 2150 is suited for measuring ranges up to 2.5 m.

The different output signals (analog current / voltage) enable connection to all HYDAC ELECTRONIC GmbH measurement and control devices as well as connection to standard evaluation systems (e.g. to PLC controls). The main fields of application for the HLT 2150 are, for example, general positioning tasks in mechanical engineering and in mobile and stationary hydraulics, as a partially integrated solution in hydraulic cylinders.
Elect_PositSens_Linear_HLT2150.jpg
Unit of Measure
Items Elect_PositSens_Linear_HLT2150.jpg
928140
HLT 2150 Externally Mounted Linear Transducer
List Price QUOTE
Elect_PositSens_Linear_HLT2150.jpg
925232
HLT 2150 Externally Mounted Linear Transducer
List Price QUOTE
Elect_PositSens_Linear_HLT2150.jpg
925808
HLT 2150 Externally Mounted Linear Transducer
List Price QUOTE
Elect_PositSens_Linear_HLT2150.jpg
926105
HLT 2150 Externally Mounted Linear Transducer
List Price QUOTE
Description N/A The HLT 2150 is a linear position transmitter which, due to its compact design, was developed in particular for use in applications where space is very limited. A wide range of accessories such as magnets is available for individual adaptation to the particular application.

The HLT 2150 is suited for measuring ranges up to 2.5 m.
Model Code Description N/A HLT 2150-R1-006-C01-2365-000 N/A HLT 2150-R1-006-C01-1350-000 N/A HLT 2150-R1-006-C02-0200-000 N/A HLT 2150-R1-006-C01-0900-000
Type N/A Externally Mounted Linear Transducer
Weight N/A 1.23 lb
Series N/A
Mounting Type N/A Externally Mounted Linear Transducer with M18 x 1.5 Screw-In Flange
Operating Temperature [Min] N/A -40 ºC
Operating Temperature [Max] N/A 85 ºC
Measuring Range N/A 0 to 2365 mm N/A 0 to 1350 mm N/A 0 to 200 mm N/A 0 to 900 mm
Output Type N/A 4 to 20 mA
Sensor Type N/A Magnetostrictive
Output Maximum Hysteresis (Full Scale) N/A ≤ ± 0.1
Output Repeatability (Full Scale) N/A ≤ ± 0.1
Resolution N/A 12 Bit, min. 0.1 mm
Non-Linearity N/A ≤ ± 0.05% Full Scale (FS)
Temperature Coefficient N/A ≤ ± 0.01% Full Scale (FS)/ ºC
Sampling Rate N/A 2 ms
Industry Standards/Certifications N/A European Conformity (CE) Mark European Standard (EN) 61000-6-1/2/3/4
Vibration Resistance According to DIN EN 60068-2-6 N/A ≤ 20 g at 10 to 500 Hz

≤ 15 g at 5 kHz
Shock Resistance According to DIN EN 60068-2-27 (11 ms) N/A ≤ 50 g
Operating Pressure N/A ≤ 6525 psi
Peak Pressure According to DIN EN ISO 19879 N/A 9135 psi N/A 9136 psi N/A 9137 psi N/A 9138 psi
Sensor Material N/A Rod: Stainless Steel 1.4571

Housing: Stainless Steel 1.4301
Electrical Connection N/A Male M12 x 1, 4 Pole
Pin Connection 1 N/A +Ub
Pin Connection 2 N/A Not Used
Pin Connection 3 N/A 0V
Pin Connection 4 N/A Signal
Power Supply N/A 9 to 30 V DC
Current Consumption N/A ≤ 100 mA
Residual Ripple of Supply Voltage N/A ≤ 250 mVpp
Storage Temperature Range N/A -40 to 100 ºC
Fluid Temperature Range N/A -40 to 120 ºC
Degree of Protection N/A IP 67
Installation Position N/A No Restriction
Torque Value N/A 50 N·m
Note N/A Reverse polarity protection of the supply voltage, excess voltage, override and short circuit protection are provided.
Additional Information N/A The different output signals (analogue current / voltage) enable connection to all HYDAC ELECTRONIC GmbH measurement and control devices as well as connection to standard evaluation systems (e.g. to PLC controls).

The main fields of application for the HLT 2150 are, for example, general positioning tasks in mechanical engineering and in mobile and stationary hydraulics, as a partially integrated solution in hydraulic cylinders.
Core Products N/A
Division N/A ELECTRONICS
Product Group Family N/A POSITION SENSORS
Product N/A POSITION SENSOR