Print Back
The HLT 2550 is a linear position transmitter which, due to its compact design, was developed in particular for use in applications where space is very limited. The measuring profile can be individually adapted to various
mounting conditions by means of spacers. The HLT 2550 is suited for measuring ranges up to 3 m.

The different output signals (analog current / voltage) enable connection to all HYDAC ELECTRONIC GmbH measurement and control devices as well as connection to standard evaluation systems (e.g. to PLC controls).

The main fields of application for the HLT 2550 are, for example, general positioning tasks in mechanical engineering and in stationary hydraulics, or as a wearfree alternative for existing measuring equipment such as potentiometers.
Elect_PositSens_Linear_HLT2550.jpg
Unit of Measure
Items Elect_PositSens_Linear_HLT2550.jpg
924966
HLT 2550 Profile Linear Transducer
List Price QUOTE
Elect_PositSens_Linear_HLT2550.jpg
928929
HLT 2550 Profile Linear Transducer
List Price QUOTE
Elect_PositSens_Linear_HLT2550.jpg
925621
HLT 2550 Profile Linear Transducer
List Price QUOTE
Description N/A The HLT 2550 is a linear position transmitter which, due to its compact design, was developed in particular for use in applications where space is very limited. The measuring profile can be individually adapted to various mounting conditions by means of spacers.

The HLT 2550 is suited for measuring ranges up to 3 m. The different output signals (analogue current / voltage) enable connection to all HYDAC ELECTRONIC GmbH measurement and control devices as well as connection to standard evaluation systems (e.g. to PLC controls).
Type N/A Profile Linear Transducer
Model Code Description N/A HLT 2550-L2-006-C01-0130-000 N/A HLT 2550-L2-006-C01-0300-000 N/A HLT 2550-L2-006-C01-0950-000
Weight N/A 2.88 lb
Mounting Type N/A Compact Profile Linear Transducer with Top Magnet Guidance Joint
Operating Temperature [Min] N/A -20 ºC
Operating Temperature [Max] N/A 75 ºC
Measuring Range N/A 0 to 130 mm N/A 0 to 300 mm N/A 0 to 950 mm
Output Type N/A 4 to 20 mA
Sensor Type N/A Magnetostrictive
Output Maximum Hysteresis (Full Scale) N/A ≤ ± 0.1
Output Repeatability (Full Scale) N/A ≤ 0.005, ≥ 0.05 mm
Resolution N/A 12 Bit, ≥ 0.05 mm
Non-Linearity N/A ≤ ± 0.01% Full Scale (FS), ≥ 0.06 mm
Temperature Coefficient N/A ≤ ± 0.01% Full Scale (FS)/ ºC Typical
Sampling Rate N/A Depending on Length:

0.5 ms (Measuring Range ≤ 1200 mm

1.0 ms (Measuring Range ≤ 2400 mm)

2.0 ms (Measuring Range ≤ 3000 mm)
Industry Standards/Certifications N/A European Conformity (CE) Mark European Standard (EN) 61000-6-1/2/3/4
Vibration Resistance According to DIN EN 60068-2-6 N/A ≤ 10 g at 50 to 2000 Hz
Shock Resistance According to DIN EN 60068-2-27 (11 ms) N/A ≤ 100 g
Sensor Material N/A Measuring Body: Aluminum
Electrical Connection N/A Male M12 x 1, 4 Pole
Pin Connection 1 N/A +Ub
Pin Connection 2 N/A Not Connected
Pin Connection 3 N/A 0V
Pin Connection 4 N/A Signal
Power Supply N/A 24 V DC ± 20%
Current Consumption N/A ≤ 100 mA
Residual Ripple of Supply Voltage N/A ≤ 250 mVpp
Storage Temperature Range N/A -30 to 85 ºC
Degree of Protection N/A IP 67
Installation Position N/A No Restriction
Note N/A Reverse polarity protection of the supply voltage, excess voltage, override and short circuit protection are provided.
Additional Information N/A The main fields of application for the HLT 2550 are, for example, general positioning tasks in mechanical engineering and in stationary hydraulics, or as a wear free alternative for existing measuring equipment such as potentiometers
Core Products N/A
Division N/A ELECTRONICS
Product Group Family N/A POSITION SENSORS
Product N/A POSITION SENSOR