HAT 1400 is an absolute measuring singleturn angle sensor. Thanks to its compact design and its small diameter, the sensor is particularly suited for the integration inside of joints and in bolts. A connection with two screwing bores enables simple fixing of a flat lever without connection shaft. Due to its two-chamber design, the electronic unit is completely encapsulated which means it meets IP 6K9K if the electrical connection is carried out accordingly. The measured value is digitized andmore
Unit of Measure

Specifications

Model Code Description

HAT 1425-F12-360R-P01-DK21-M05-000

Industry Standards/Certifications

CE Mark: EN 61000-6-1 / -2 / -3 / -4

Measuring Range

0 to 360 º

Direction of Rotation

Clockwise Rotation

Weight

0.366 lb

Material

Stainless Steel

Mounting Type

Mounting Flange

Operating Temperature [Min]

-40 ºC

Operating Temperature [Max]

85 ºC

Power Rating

1.4 W

Output Type

SAE J1939 Protocol

Resolution

14

Accuracy (At Room Temperature)

± 0.1º Typical, ± 0.2º Maximum

Accuracy (Over the Temperature Range)

± 0.05º / 10 K Typical, ± 0.1º / 10 K Maximum

Repeatability

≤ ± 0.05 º

E13 Mark

E13*10R05/01*15314*00

Vibration Resistance According to DIN EN 60068-2-6: 2010

7.5 mm (5 Hz ≤ f < 8.2 Hz), 2 g (8.2 Hz ≤ f < 2000 Hz)

Shock Resistance According to DIN EN 60068-2-27: 2011

20 g (11 ms in 3 Axes)

Degree of Protection

IP 67, IP 6K9K (Electronics)

Storage Temperature Range

-40 to 85 ºC

Residual Ripple of Supply Voltage

≤ 5%

Note

Reverse polarity protection of the supply voltage, overvoltage, override and short circuit protection are provided.

DC Power Supply

9 to 36 V

Axial Load [Max]

60 N

Radial Load [Max]

100 N

Data Link Layer

SAE J1939-21

Network Layer

SAE J1939-31

Network Management

SAE J1939-81

Default Settings

Baud rate: 250 kbit/s; CAN Data Source Address: 1

Electrical Connection

M12, 5 Pole

Pin Connection 1

Shield/Housing

Pin Connection 2

Ub+

Pin Connection 3

0 Voltage

Pin Connection 4

CAN High

Pin Connection 5

CAN Low