The HY-TTC 30H is a compact control unit specially developed for use in cost-sensitive applications or smaller machines. The device is based on an Infineon XC22xx microcontroller and supports programming in C. With its 30 freely configurable I/Os it can be operated with a wide variety of sensors and actuators.

The 30H version is best suited for controlling proportional functions. Six out of the eight PWM outputs have integrated current measurement which means that, for example, up to threemore
Unit of Measure

Specifications

Model Code Description

HY-TTC 30-H-CP-00-000

Operating Temperature [Min]

-40 ºC

Operating Temperature [Max]

85 ºC

Software

Programming: Board Support Package and Driver Library Available for Programming in 'C'

Connector Type

48 pins

Operating Altitude

0 to 4000 m

Supply Voltage

8 to 32 V

Maximum Peak Voltage

40 V

Standby Current

≤ 1 mA

Idle Current

≤ 120 mA

Maximum Current

24 A

Functional Safety

Designed for ISO 13849 PL b

European Conformity (CE) Mark

2014/30/EU

E - Mark

ECE-R10 Rev.4

Electromagnetic Compatibility (EMC)

CISPR 25 EN 13309 EN 61000-6-2/-4 ISO 14982

Electrostatic Discharge (ESD)

ISO 10605

Electrical

ISO 16750-2 ISO 7637-2,-3, Limited to 40 V by External Load Sump Protection

Ingress Protection (IP) Class

EN 60529 IP67 ISO 20653 IP6k9k

Climatic

ISO 16750-4

Mechanical

ISO 16750-3

Software

C Programming

Equipment Options

Standard

Weight

0.73 lb

Division

ELECTRONICS

Product Group Family

INPUT/OUTPUT EXPANSION MODULES

Product

MOBILE CONTROLLERS / IO MODULES

Dimensions

Length

147 mm

Depth

38 mm

Width

92 mm

Minimum Connector Release Clearance Height

38 mm

Minimum Connector Release Clearance Length

208 mm

Minimum Connector Release Clearance Width

92 mm

CPU Core

CPU Core

  • Infineon XC22xx 16/32 bit CPU running at 80 MHz
  • 768 kByte int. Flash, 82 kByte int. RAM, 8 kByte EEPROM

Output Type

Output Type

  • 6 x PWM OUT or digital OUT, up to 3 A, high side switch with current measurement, overload and open load detection alternative use digital timer IN (10 Hz - 10 kHz) or analog IN 0 - 32 V both with integrated Pull-Up
  • 2 x PWM OUT or digital OUT, up to 3 A, high side switch with overload detection, open load detection and support for high inrush current loads alternative use digital timer IN (10 Hz - 10 kHz) or analog IN 0 - 32 V both with integrated Pull-Up
  • 2 x digital OUT, up to 3 A, low side switch with overload and open load detection alternative use analog IN, 0 - 32 V with integrated Pull-Up
  • 6 x PVG OUT 15 % - 85 % BAT+ with PVG valve alternative use voltage OUT 0 V - 75 % BAT+ with 10 kOhm low side load or analog IN 0 - 32 V

Input Type

Input Type

  • 4 x digital timer IN (0.1 Hz - 10 kHz)alternative use analog IN, 0 to 32 V 1x rotary encoder configurable Pull-Up/Down in digital IN mode
  • 2 x analog IN, configurable in software 0 - 5 V/10 V IN, 0 - 25 mA IN, 0 - 65 kOhm IN, up to 25 mA LED control OUT
  • 6 x analog IN, configurable in software 0 - 5 V/10 V IN, 0 - 25 mA IN, up to 25 mA LED control OUT
  • 2 x analog IN 0 - 32 V configurable Pull-Up/Down in digital IN mode

Other

Other

  • 1 x sensor supply 5 V, 100 mA
  • Internal monitoring of board temperature, sensor supply, K15 input and battery voltage

Interface

Interface

  • 1 x CAN, 125 kbit/s up to 1 Mbit/s
  • 1 x CAN bus termination configurable via connector pins

Note

N/A All I/Os and interfaces are protected against short circuit to GND and BAT+ and can be configured by software. All analog inputs use 10 bit resolution. All analog voltage inputs can be used as digital inputs with configurable switching levels and hysteresis. Dedicated power supply pins for high side outputs. Details to the standards can be found in the user manual.