United States
Contact
Contact Finder Location Finder Feedback for the President Contact us
myHYDAC
Request a Quote
This pressure transmitter has been specially developed for shipbuilding applications and is based on the HDA 4000 series.

The HDA 4100 has a ceramic measurement cell with thick-layer strain gauge for measuring absolute pressure in the low pressure range.

The evaluation electronics converts the measured pressure into a proportional analogue signal of 4 .. 20 mA. The electronic module is completely potted to protect it against humidity, vibrations and shock, and is enclosed in a solid Stainless Steel housing.
Unit of Measure

Specifications

Model Code Description

 N/A HDA 4146-A-02,5-S00-F1

Industry Standards/Certifications

 N/A CE Mark: EN 61000-6-1 / 2 / 3 / 4

Type

 N/A Absolute Shipping Approval Pressure Transducer

Mechanical Connection Type

 N/A G1/4 A ISO 1179-2, Male

Weight

 N/A 0.33 lb

Housing Material

 N/A Stainless Steel

Burst Pressure

 N/A 12 bar

Output Signal

 N/A 4 to 20 mA

Wetted Material

 N/A Mechanical Connection: Stainless Steel

Sensor Cell: Ceramic

Seal: FKM

Electrical Connection

 N/A Male, M12 x 1, 4 Pole

DC Power Supply Voltage

 N/A 10 to 32 V

Output Typical Accuracy According to DIN 16086, Terminal Based (Full Scale)

 N/A ≤ ± 0.5 %

Output Maximum Accuracy According to DIN 16086, Terminal Based (Full Scale)

 N/A ≤ ± 1

Output Typical Accuracy Best Fit Straight Line (B.F.S.L) (Full Scale)

 N/A ≤ ± 0.25 %

Output Maximum Accuracy Best Fit Straight Line (B.F.S.L) (Full Scale)

 N/A ≤ ± 0.5 %

Output Typical Temperature Compensation Zero Point (Full Scale)

 N/A ≤ ± 0.02 %/°C

Output Maximum Temperature Compensation Zero Point (Full Scale)

 N/A ≤ ± 0.03 %/°C

Output Typical Temperature Compensation Span (Full Scale)

 N/A ≤ ± 0.02 %/°C

Output Maximum Temperature Compensation Span (Full Scale)

 N/A ≤ ± 0.03 %/°C

Output Maximum Non-Linearity at Maximum Setting to DIN 16086 (Full Scale)

 N/A ≤ ± 0.5 %

Output Maximum Hysteresis (Full Scale)

 N/A ≤ ± 0.4 %

Output Repeatability (Full Scale)

 N/A ≤ ± 0.1 %

Output Rise Time

 N/A ≤ 1 ms

Output Long-Term Drift Per Year (Full Scale)

 N/A ≤ ± 0.3 %

Vibration Resistance According to DIN EN 60068-2-6 at 10 to 500 Hz

 N/A ≤ 20 g

Pin Connection 1

 N/A Signal +

Pin Connection 2

 N/A Not Connected

Pin Connection 3

 N/A Signal -

Pin Connection 4

 N/A Not Connected

Residual Ripple of Supply Voltage

 N/A ≤ 5 %

Life Expectancy (0 to 100% Full Scale (FS))

 N/A > 10 Million Cycles

Overload Pressure

 N/A 8 bar

Operating Temperature [Min]

 N/A -25 ºC

Operating Temperature [Max]

 N/A 85 ºC

Compensated Temperature Range

 N/A -25 to 85 ºC

Storage Temperature Range

 N/A -30 to 100 ºC

Fluid Temperature Range

 N/A -25 to 85 ºC

Operating Pressure [Min]

 N/A 0 bar

Operating Pressure [Max]

 N/A 2.5 bar

Degree of Protection

 N/A IP 67

Torque Value

 N/A 20 N·m

Additional Information

N/A For use in the shipping industry, these pressure transmitters have been approved by the following organizations.

American Bureau of Shipping

Lloyds Register of Ships

Det Norske Veritas / Germanischer Lloyd

Bureau Veritas

Note

N/A Reverse polarity protection of the supply voltage, excess voltage, override and short circuit protection are provided.